使用卷簾門時怎樣才能做好系統的維護保養！
安裝完卷簾門后，如果想長時間使用門系統并使用它，應該在日常使用中維護和維護哪種系統?
After installing the rolling shutter door, if you want to use the door system for a long time and use it, which system should be maintained in daily use?
卷簾門手動檢查區域：
Manual inspection area of rolling shutter door:
1.檢查卷簾門門滑軌和門扇是否變形和卡住，手動按鈕盒是否處于良好狀態。
1. Check whether the sliding rail and leaf of the rolling shutter door are deformed and stuck, and whether the manual button box is in good condition.
2.如果指示可卷起門標志的電氣盒是正常的，并且盒體完好無損。
2. If the electrical box indicating the sign of rolling up door is normal, and the box body is intact.
3.打開按鈕盒的門，檢查按鈕是否可以正常使用。
3. Open the door of the button box and check whether the button can be used normally.
卷簾門自控檢查的方面：
Automatic control inspection of rolling shutter door:
1.使用點燃的香煙或其他煙源測試系統中的任何煙霧傳感器，如果發現無法將其打開，請及時進行檢查和維修。
1. Use lit cigarettes or other smoke sources to test any smoke sensor in the system. If it is found that it cannot be opened, please check and repair it in time.
2.清潔卷簾并打掃干凈灰塵。如果涂料局部變形，請修理以確保卷簾門的外觀整潔美觀。
2. Clean the roller shutter and clean the dust. If the coating is partially deformed, please repair it to ensure that the appearance of the rolling shutter door is clean and beautiful.
卷簾門年度維護：
Annual maintenance of rolling shutter door:
1.對卷簾門控制盒的自檢按鈕，故障警報靜音按鈕和重置按鈕進行特殊檢查。
1. Conduct special inspection on the self inspection button, fault alarm mute button and reset button of the roller shutter door control box.
2.擰緊所有電線接頭，清潔控制箱中的灰塵，然后檢查箱中的電氣組件是否齊全。
2. Tighten all wire connectors, clean the dust in the control box, and then check whether the electrical components in the box are complete.
客戶服務熱線：13296405222
濟南愛窗加工部
在線留言
聯系我們
