電動卷簾門的使用非常普遍，卷簾門不僅使用方便，而且性很高。那么，電動卷簾門怎么調高低呢？濟南電動卷簾門安裝維修人員為您介紹一番內容。

The use of electric roller shutter door is very common. The roller shutter door is not only convenient to use, but also has high safety. Then, how to adjust the height of the electric roller shutter door? Jinan electric roller shutter door installation and maintenance personnel will introduce some contents to you.

1.手動電動卷簾門可借助卷簾門中心軸上的扭簧手動上下拉動卷簾門開關，以平衡受力，電動伸縮門主要由門體、驅動器和控制系統組成，卷簾門又稱卷簾門，是由許多鉸接的門片串聯而成，在固定的滑道內，以門上方的卷軸為中心上下轉動的門。

1. The manual electric roller shutter door can manually pull the roller shutter door switch up and down with the help of the torsion spring on the central shaft of the roller shutter door to balance the force. The electric telescopic door is mainly composed of the door body, driver and control system. The roller shutter door is also known as the roller shutter door, which is composed of many hinged door pieces in series. It is a door that rotates up and down with the roller above the door as the center in a fixed slide.

2.電動卷簾門使用專用電機驅動卷簾門中心軸旋轉，到達卷簾門開關，旋轉到電機設定的上下限時自動停止，電動卷閘門的電機是電機功率不足引起的，說明測量電流高于額定電流，需要更換大電機，散熱條件不好，聯軸器不同心。

2. The electric roller shutter door uses a special motor to drive the central shaft of the roller shutter door to rotate. When it reaches the roller shutter door switch and rotates to the upper and lower limits set by the motor, it will automatically stop. The motor of the electric roller shutter is caused by insufficient motor power, which indicates that the measured current is higher than the rated current. It needs to replace the large motor. The heat dissipation condition is poor and the coupling is not concentric.

3.門體造型新穎美觀，靈活多變，結構緊湊，空間小，廣泛應用于建筑內外門，為保證電動卷簾門與墻體形成一個整體，應做好密封，然后對洞口和墻體進行粉刷，上漆后，門縫應平整光滑，電動卷簾門應能自由輕開，不能過緊、過松、反彈。

3. The door body is novel and beautiful in shape, flexible and changeable, compact in structure and small in space. It is widely used in the internal and external doors of buildings. In order to ensure that the electric roller shutter door and the wall form a whole, it should be sealed, and then the opening and the wall should be painted. After painting, the door seam should be flat and smooth, and the electric roller shutter door should be able to open freely and gently without being too tight, too loose and rebound.

安裝電動卷簾門后，可以通過上方電機處的限位器調節限位器上下調節高度。正確方式是用遙控器將卷閘門升高到合適的高度，然后找到調節上下高度的限位器，旋轉調節固定螺絲調節卷閘門的高度，后擰緊固定螺絲，通過遙控器檢查卷閘門的高度是否合適。

After the electric roller shutter door is installed, the height can be adjusted up and down by the stopper at the upper motor. The correct way is to first use the remote controller to raise the rolling gate to a proper height, then find the limiter for adjusting the upper and lower heights, rotate the adjusting fixed screw to adjust the height of the rolling gate, then tighten the set screw, and check whether the height of the rolling gate is appropriate through the remote controller.

以上是關于電動卷簾門怎么調高低的內容，希望對大家有幫助！電動卷簾門在安裝時要講究方法，否則安裝不好將會影響使用，建議是請的師傅安裝。關注我們http://m.luoboyy.com，更多認識！

The above is about how to adjust the height of the electric roller shutter door. I hope it will help you! When installing the electric roller shutter door, pay attention to the method, otherwise the use will be affected if the installation is not good. It is recommended to ask a professional master to install it. Follow us http://m.luoboyy.com Yes, I know more!