抗風卷簾門的特點就是抗風性能優越，所以呢，很多地處空曠地區的廠房、倉庫比較喜歡安裝抗風卷簾門，特別是一些有大風天氣的環境。作為一家抗風卷簾門的生產廠家，小編為大家整理了一些抗風卷簾門的安裝步驟：

 

The characteristic of wind resistant rolling shutter door is superior wind resistance performance. Therefore, many factories and warehouses located in open areas prefer to install wind resistant rolling shutter door, especially in some windy weather environment. As a manufacturer of wind resistant rolling shutter door, Xiaobian has sorted out some installation steps of wind resistant rolling shutter door for you

 

1、準備好材料和安裝工具：

 

1. Prepare materials and installation tools:

 

材料：專用夾具、刮刀、粉線包、沖擊電鉆、手手電鉆、電焊機、切割機、螺絲刀、錘子、線墜、水平尺等。

 

Materials: special fixture, scraper, powder wire bag, impact drill, hand drill, electric welding machine, cutting machine, screwdriver, hammer, line drop, level ruler, etc.

 

工具：中柱、上罩、卷軸 、葉片、導軌。

 

Tools: center pillar, upper cover, reel, blade, guide rail.

 

2、確定要安裝抗風卷簾門的位置，并用線墜、水平尺等工具進行標注，找準水平線和垂直線。

 

2. Determine the position where the wind resistant rolling shutter door is to be installed, mark it with the tools such as line drop and level ruler, and find out the horizontal line and vertical line.

 

8.jpg

 

3、根據定位的劃線開始安裝抗風卷簾門的邊框。

 

3. Start to install the frame of the wind resistant rolling shutter door according to the marking of positioning.

 

4、根據卷門機的說明書所提示的方法步驟以及注意事項進行抗風卷簾門機的安裝。

 

4. According to the instructions of the rolling door machine, the installation of the wind resistant rolling door machine is carried out.

 

5、將組裝好的抗風卷簾門體固定好，然后將限位器找準位置裝上，并試著運轉。

 

5. Fix the assembled anti wind rolling shutter door, and then fix the limiter at the right position, and try to run it.

 

6、進行滑道、手動機構、包箱的安裝。

 

6. Installation of slideway, manual mechanism and case.

 

7、進行調試和運轉，確保每項功能和設備運轉完好。

 

7. Carry out commissioning and operation to ensure each function and equipment in good condition.

 

8、一切安裝并檢查完畢，抗風卷簾門的安裝就算完成了，接下來就可以正常使用了。

 

8. After all the installation and inspection, the installation of the wind resistant rolling shutter door is completed, and then it can be used normally.

 

注意：，必須要保證門簾卷軸同心、水平、簾片開啟順滑，沒有滯卡現象，而且卷門機要安裝要呈一條水平線。其次，就是要注意卷門機的防潮措施，避免抗風卷簾門電機因?yàn)槭艹背霈F(xiàn)問題，導致卷簾門電機燒壞而沒有辦法正常的進行開關門的操作。，卷門機接有一根接地線，一定要連接，這樣可以有效地防漏電觸電事故的發生。

 

Note: first of all, it is necessary to ensure that the curtain roller is concentric, horizontal, and the curtain piece is opened smoothly without stagnation, and the installation of the door roller should be in a horizontal line. Secondly, it is necessary to pay attention to the moisture-proof measures of the rolling door machine, so as to avoid the problems caused by the damp of the anti wind rolling door motor, which leads to the burning of the rolling door motor and has no way to open and close the door normally. Finally, the rolling door machine is connected with a ground wire, which must be connected, so as to effectively prevent the occurrence of leakage and electric shock accidents.